The Spot On Laser Bracket will only fit APQS Machines built after 2013. The Spot On Bracket does not fit the 2019 or newer APQS Lenni machines.
The Spot On Laser Bracket is the computerized quilter’s solution to clicking in exact points without lowering your needle down! This simple stainless steel bracket holds your laser pointer at the front of your APQS machine head, allowing you to shine the light into the dead center of your hopping foot. With the Spot On, you can mark the boundaries for your blocks, borders and other motifs on your APQS computerized quilting machine quickly and accurately.
Please be aware, the Spot On is ONLY for Next Generation APQS machines with the LED light panel. If your APQS machine has a fluorescent tube light hanging below your handles this laser bracket will not fit. You must have an APQS machine that has LED lights. If you are unsure if you have a LED light APQS machine, please email us a photo of your machine so we can help you.
If you have a Mille30 machine make sure your laser cord is at least 36″. If the cord is shorter, you will want a longer cord, you can find one here. If you have a Larry, Lenni, Lucey, Freddie (Freedom), Mille (Millennium)- you don’t need anything extra as the laser light extension cord is plenty long. Only early model Mille30 machines require a laser light extension cord. Most 2018 and newer Mille30 machines don’t need anything extra.
The bracket is mounted to the left side of the machine head when standing at needle side of machine.
Remove two of the existing screws and replace with the longer screws provided with the bracket.
Plug the laser light into the APQS machine’s existing top laser light port and slide onto the new laser light bracket post. Shine laser into the dead center of hopping foot.
The Spot On is especially perfect for APQS Intelliquilter and/or Quilt Path owners. This bracket is only for APQS machines. It will not fit other brands. You must have an APQS machine with LED lights – not a fluorescent tube light.
|Dimensions||6 × 6 × 0.25 in|